Solar Panel Cleaning System Rotating Rolling Brush Cleaning Robot


You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.


Solar Panel Cleaning System Rotating Rolling Brush Cleaning Robot


Product Description

Brush to Clean Solar Panels

Solar Panel Cleaning Robot–D41

D41 solar panel cleaning robot is designed,developed, manufactured for the special environment of photovoltaic station. It focus on the solution of large scale rooftop distributed photovoltaic station, farming photovoltaic power station, carport photovoltaic station where the tilt angles should be <15°.

*Easy to use;      
*Easy operation&maintenance;      
*One person remote control;      
*High efficiency: 1 robot can clean >0.8MW panels per day;      
*Dry cleaning or water cleaning depends on the needs.

Detailed Photos

Solar Cleaning Near Me
Solar Panel Cleaning Brush
Solar Panel Clean and Service
Electric Cleaning Brush
Solar Cleaner
Go Green Solar Clean

Product Parameters

Parameter itemsTechnical parameterRemarks
Work ModeRemote controlManually operating the remote control
Operating Voltage24VCharging 220V
Power supply modeLithium battery33.6V 20AH
Motor power120W120W+30W*2
Lithium battery33.6V/20AHUnit weight 4kg
Rotational Speed400-500rpmIdling speed 600rpm
Walking modeMotor-driven rubber tracks 
Obstacle surmounting ability20-40cmVertical 3-5cm
Brush dimensionLength 1100mm,diameter 130mmPVC spiral brush
Walking speed25~40m/minHigh speed40m/min,low speed25m/min
Battery life3-4hDepends on environment and season
Working efficiency per day0.8-1.2MWpCentralized power station
Product size1210*1080*250mmWooden box package
Weight56kgIncluding 1 battery


Remote Controller Use Introduction:
 Before starting panel cleaning, to avoid the robot falling from panel or damage occured on site, please familiarize yourself with the operation of the remote controller as much as possible.

Robot Cleaner

Packaging & Shipping

Cleaning Machine

Packing List:

*Cleaning robot(D41-1100)1set;      
*Remote controller;      
*Lithium battery(33.6V20ah,including charging adapter,battery bag)2pcs;      
*Hose connector kit(rotary joint 1pcs,straight joint 2pcs,hose pipe 2pcs);      
*Tool kit 1 pack(4#,5#Allen wrench one each,13×16,14×17 Open end wrench one each, Cross screwdriver 1pcs).

Packing Size&Weight:


Daily Maintenance & Care:
 1,Check the brush, if it’s slightly deformed,use the hot hair dryer and keep blowing it till dry and use hand to shape it;if it’s heavily deformed,please replace the brush.    

2,Stock the robot properly after operation to prevent exposure it to sun and rain. Take the battery out while longtime not operation, and keep the battery in dry and ventilated environment. Charge the battery every 15 – 20 days to prevent from damage.    

3,Do not expose the battery in flammable and explosive environment while charging, and the charging time should not exceed twice of the battery endurance.    

4,Our company is not responsible for any damage or injury caused by not following this user manual .

Scroll to Top